Check the forecast before you rent!
Montrose
68°
Mostly Cloudy
7:25am6:10pm EDT
Feels like: 68°F
Wind: 3mph WSW
Humidity: 76%
Pressure: 30.24"Hg
UV index: 3
ThuFriSatSunMon
72/59°F
68/52°F
59/34°F
50/41°F
55/41°F
2
Yes
Thumbnail
Thumbnail
List
1
1000000
/catalog/
0 items in cart
or empty cart
BX3 Supply & Rental Main Rental Catalog
Thumbnail
Filter
Clear All

Rental Catalog

CRequest Quote
yDetails
14 INCH DEMO SAW Image
CRequest Quote
yDetails
14INCH MUTI CUTTER SAW Image
CRequest Quote
yDetails
185 CFM AIR COMPRESSOR Image
CRequest Quote
yDetails
20 TON LOG SPLITTER Image
CRequest Quote
yDetails
4 LAMP STADIUM LIGHT TOWERS Image
CRequest Quote
yDetails
4 TON PORTA POWER Image
CRequest Quote
yDetails
AIRLESS PAINT SPRAYER Image
CRequest Quote
yDetails
ALUMINUM BRAKE Image
CRequest Quote
yDetails
ANGLE BRUSH ATTACHMENT Image
CRequest Quote
yDetails
APPLIANCE DOLLY Image
CRequest Quote
yDetails
AUGER WITH BIT Image
CRequest Quote
yDetails
BILJAX TOWABLE 50
CRequest Quote
yDetails
BOBCAT 418 EXCAVATOR Image
CRequest Quote
yDetails
BOBCAT E26 EXCAVATOR Image
CRequest Quote
yDetails
BOBCAT E35 EXCAVATOR Image
CRequest Quote
yDetails
BOBCAT T590 SKID STEER Image
CRequest Quote
yDetails
BOBCAT T630 SKIDSTEER Image
CRequest Quote
yDetails
BOBCAT TILLER ATTACHMENT 76INCH Image
CRequest Quote
yDetails
BOSCH JIGSAW Image
CRequest Quote
yDetails
BRUSH CUTTER ATTACHMENT Image
CRequest Quote
yDetails
BULL FLOAT & FINISHING BROOM Image
CRequest Quote
yDetails
CARPET DRYER Image
CRequest Quote
yDetails
CARPET EXTRACTOR Image
CRequest Quote
yDetails
CIRCULAR SAW Image
CRequest Quote
yDetails
CONCRETE FLOOR SAW Image
CRequest Quote
yDetails
CONCRETE GRINDER Image
CRequest Quote
yDetails
CONCRETE MIXER Image
CRequest Quote
yDetails
CONCRETE VIBRATOR Image
CRequest Quote
yDetails
CONDUIT BENDER Image
CRequest Quote
yDetails
DEHUMIDIFIER Image
CRequest Quote
yDetails
DOOSAN G25 TOW-ABLE GENERATOR Image
CRequest Quote
yDetails
DOZER BLADE ATTACHMENT Image
CRequest Quote
yDetails
DRYWALL LIFT Image
CRequest Quote
yDetails
DRYWALL SANDER Image
CRequest Quote
yDetails
E-Z TRENCH BEDSCAPER BED EDGER/DEFINER Image
CRequest Quote
yDetails
EXTENSION & A FRAME LADDERS Image
CRequest Quote
yDetails
FLAGRO HEATER Image
CRequest Quote
yDetails
FLOOR BUFFER Image
CRequest Quote
yDetails
FORKS ATTACHMENT Image
CRequest Quote
yDetails
GRAPPLE BUCKET ATTACHMENT Image
CRequest Quote
yDetails
GROUND HOG AUGER Image
CRequest Quote
yDetails
HAND DOLLY Image
CRequest Quote
yDetails
HILTI TE-70 ROTARY HAMMER DRILL Image
CRequest Quote
yDetails
HILTI TE1000 DEMO HAMMER Image
CRequest Quote
yDetails
HITACHI NAIL COILER Image
CRequest Quote
yDetails
HOBART CHAMPION ELITE STICK Image
CRequest Quote
yDetails
HOBART HANDLER 140 MIG WELDER Image
CRequest Quote
yDetails
HOLESAW KIT Image
CRequest Quote
yDetails
HONDA MID-TINE TILLER Image
CRequest Quote
yDetails
HONDA REAR-TINE TILLER Image
CRequest Quote
yDetails
HONDA WEED TRIMMER Image
CRequest Quote
yDetails
HUSQVARNA LDX ATTACHMENT Image
CRequest Quote
yDetails
HYDRO RAM ATTACHMENT Image
CRequest Quote
yDetails
HYPERTHERM PLASMA CUTTER Image
CRequest Quote
yDetails
INDOOR SCISSOR LIFT Image
CRequest Quote
yDetails
KINETIC WATER RAM Image
CRequest Quote
yDetails
LASER LEVEL Image
CRequest Quote
yDetails
LAWN EDGER Image
CRequest Quote
yDetails
LAWN ROLLER Image
CRequest Quote
yDetails
LIGHT TOWER BALLOON TEREX Image
CRequest Quote
yDetails
LINOLEUM ROLLER Image
CRequest Quote
yDetails
MAGNETIC DRILL PRESS Image
CRequest Quote
yDetails
MILWAUKEE 3/8 DRILL Image
CRequest Quote
yDetails
MILWAUKEE BAND SAW Image
CRequest Quote
yDetails
MILWAUKEE CORDLESS DRILL Image
CRequest Quote
yDetails
MILWAUKEE DRYWALL SCREWDRIVER Image
CRequest Quote
yDetails
MILWAUKEE ELECTRIC GRINDER Image
CRequest Quote
yDetails
MILWAUKEE ELECTRIC SAWZALL Image
CRequest Quote
yDetails
MILWAUKEE HAND SANDER Image
CRequest Quote
yDetails
MILWAUKEE HEAT GUN Image
CRequest Quote
yDetails
MILWAUKEE IMPACT WRENCH 1/2 INCH Image
CRequest Quote
yDetails
MITER SAW Image
CRequest Quote
yDetails
MULTI-SPEED WALK BEHIND SWEEPER Image
CRequest Quote
yDetails
ORBITAL FLOOR SANDER Image
CRequest Quote
yDetails
PALLET JACK Image
CRequest Quote
yDetails
PIANO DOLLY Image
CRequest Quote
yDetails
PLATE COMPACTOR Image
CRequest Quote
yDetails
PLATFORM DOLLY Image
CRequest Quote
yDetails
PNEUMATIC FLOOR NAILER Image
CRequest Quote
yDetails
PNEUMATIC JACKHAMMER Image
CRequest Quote
yDetails
PNEUMATIC ROCK DRILL Image
CRequest Quote
yDetails
PORTABLE AIR COMPRESSOR Image
CRequest Quote
yDetails
PORTABLE GENERATORS Image
CRequest Quote
yDetails
PORTABLE PRESSURE WASHER Image
CRequest Quote
yDetails
POWER BROOM Image
CRequest Quote
yDetails
POWER DRAIN SNAKE Image
CRequest Quote
yDetails
POWER SCREED Image
CRequest Quote
yDetails
POWER TROWEL Image
CRequest Quote
yDetails
RAMMER COMPACTOR Image
CRequest Quote
yDetails
RAYCO 6INCH WOOD CHIPPER Image
CRequest Quote
yDetails
RIGHT ANGLE DRILL Image
CRequest Quote
yDetails
RIGID POWER THREADER Image
CRequest Quote
yDetails
ROCK HOUND ATTACHMENT Image
CRequest Quote
yDetails
SAKAI DOUBLE DRUM ROLLER Image
CRequest Quote
yDetails
SAKAI SHEEPSFOOT TRENCH ROLLER Image
CRequest Quote
yDetails
SAND BLASTER Image
CRequest Quote
yDetails
SELF PROPELLED MOWER Image
CRequest Quote
yDetails
SELF-PROPELLED BRUSH HOG Image
CRequest Quote
yDetails
SHOP VAC Image
CRequest Quote
yDetails
SILVER LINE DRUM FLOOR SANDER Image
CRequest Quote
yDetails
SILVER LINE FLOOR EDGER Image
CRequest Quote
yDetails
SK350 DITCH WITCH Image
CRequest Quote
yDetails
SK650 DITCH WITCH Image
CRequest Quote
yDetails
SKID MOUNT PRESSURE WASHER Image
CRequest Quote
yDetails
STONE RAKE Image
CRequest Quote
yDetails
STUMP GRINDER Image
CRequest Quote
yDetails
SUBMERSIBLE PUMP Image
CRequest Quote
yDetails
TE3000 HILTI BREAKER Image
CRequest Quote
yDetails
TILE SAW Image
CRequest Quote
yDetails
TILT DECK TRAILER 6 x 12 Image
CRequest Quote
yDetails
TRANSIT LEVEL Image
CRequest Quote
yDetails
UTILITY TRAILER 6 X 12 Image
CRequest Quote
yDetails
WALLPAPER STEAMER Image
CRequest Quote
yDetails
Ditch Witch SK600 Image
0
CRequest Quote
yDetails
14 INCH DEMO SAW Image
14 INCH DEMO SAW
Size 14″ Blade Capacity Application 4-7/8″ Cutting Depth Features •Kevlar coated starter cord •Auto choke and primer •Multi-stage air filtration •Ergonomically arranged operating controls •Effective, 5 point vibration absorption with steel springs •Spark protection Plate • Manual filter cleaning with rocker wheel • Semi-automatic belt tensioning system • Quick connect for wet cut capability • Durable engine & machine components including : Mahle Nikasil cylinder. 6 ribbed poly v-belt. Double roller bearings for the clutch drum. Double ring piston Operating Weight : 24 LB With blade attached Engine Specs. Engine : Solo Single cylinder, 2 stroke 4 channel flushing Engine Cap. cu Inch / cc : 4.98 / 81 Max Power HP / kW / RPM : 5.44 bhp / 9,300 4.0 kW / 9,300 Max Torque Ft Lbs / Nm / RPM : 3.54 / 7,000 4.8 / 7,000 Max RPM : 9,500 Fuel Tank Capacity : 30 Oz
CRequest Quote
yDetails
14INCH MUTI CUTTER SAW Image
14INCH MUTI CUTTER SAW
14″ Multi Cutter Saw
CRequest Quote
yDetails
185 CFM AIR COMPRESSOR Image
185 CFM AIR COMPRESSOR
The Sullair 185 Tier 4 Final Portable Air Compressor is the workhorse of the Sullair mobile fleet with a rotary screw air end with integrated leak-free design, a turbocharged Kubota diesel engine, compact design, easy service and maintenance and large enclosed tool storage area. Portable unit is ready to hit the road. U.S.A. CFM at 100 PSI 185, Dimensions L x W x H in. 130 3/4 x 59 1/4 x 58, Drain System Standard, Drive Direct, Duty Cycle 100, After-Cooler Included No, Air Outlet Size in. 3/4, Engine Displacement cc 111.43, Engine Idle Control Yes, Fuel Capacity gal. 27, HP 49, Low Oil Protection Yes, Pump Rotary screw air end, Start Type Pushbutton electric, Working Pressure PSI 100, Max. Improved Sullair 14-series rotary screw air end with integrated leak-free design and direct drive for reliable durability Proven Tier 4 final emission compliant Kubota 49 HP diesel engine, turbocharged to handle high altitudes Improved fuel efficiency with a 27-gallon fuel tank to deliver up to 10 hours of run time Compact design for improved maneuverability Easy service and maintenance Improved access to engine air filter and oil dipstick Consolidated fuse/relay box in one location Enclosed large toolbox to carry air tools Model Number: 02250226-989. Age Group: adult. Feature Portable Power source Diesel Capacity 27 gal Power output 49 hp Pump style Single Stage
CRequest Quote
yDetails
20 TON LOG SPLITTER Image
20 TON LOG SPLITTER
Engine Brand Honda GC Starting System Recoil Start CC 160 CCs Fuel Tank Size 0.48 Gallons Hydraulics Auto Return Yes Hydraulic Filter Yes Hydraulic Oil Included No Hydraulic Reservoir Size 2.91 Max Pump PSI 3000 PSI Cylinder Diameter 4 Inches Cylinder Length 24 Inches Cycle Time 14 Seconds Tonnage 20 Tons Wedge Wedge Material Steel Wedge Size 9 Inches Wedge Style 2-way Log Capacity Max Log Length 24 Inches Towing Towable Yes Hitch Type 2 Inch Ball Hitch Accessories Jack Stands Included Log Cradles Included Overview Assembly Required Yes Weight 400 Pounds Consumer Warranty 3 Years Product Length 72 Inches Product Width 42 Inches Product Height 36 Inches
CRequest Quote
yDetails
4 LAMP STADIUM LIGHT TOWERS Image
4 LAMP STADIUM LIGHT TOWERS
4 Lamp Light Towers
CRequest Quote
yDetails
4 TON PORTA POWER Image
4 TON PORTA POWER
Get 4 tons of force for lifting, pushing, pulling, bending, straightening, and spreading. This heavy duty hydraulic equipment kit is ideal for a variety of auto body, frame repair, and construction jobs. The kit includes a full range of accessories. Powerful 10,000 PSI hydraulic ram pump Interlocking extension tubes 10-3/8 in. pump handle with cushion grip for easy pump action Portable – no need for a power source All steel construction
CRequest Quote
yDetails
AIRLESS PAINT SPRAYER Image
AIRLESS PAINT SPRAYER
Technical Specs ItemAirless Paint Sprayer Paint Sprayer Sub-BrandControlMax 1700 Pro StyleCart HP5/8 Flow Rate0.33 gpm Voltage120VAC Amps AC4.3 Operating Pressure1500 psi Guns Supported1 Tip Size Included0.017″ Max. Tip Size0.017″ Hose Length50 ft. Max. Hose Length200 ft. Height31-3/4″ Length20″ Width16-3/4″ For Use WithMfr Model No. 353-413, 353-515, 353-517, 353-619, 353-701, 353-708, 353-702 IncludesHose, Spray Gun, Spray Tip, Tip Guard
CRequest Quote
yDetails
ALUMINUM BRAKE Image
ALUMINUM BRAKE
Model Line: Mark II TrimMaster Throat Depth: 14″ Hinge Type: POWERslot™ Stand Options: Sold seperately;   CORE SPECS Model Length Castings Weight TM2 2’0″ (0.6 m) 2 ea. 36 lbs (16.4 kg) TM4 4’6″ (1.4 m) 3 ea. 67 lbs (30.5 kg) TM6 6’6″ (2.0 m) 3 ea. 85 lbs (38.6 kg) TM8 8’6″ (2.6 m) 4 ea. 104 lbs (47.3 kg) TM10 10’6″ (3.2 m) 5 ea. 123 lbs (55.9 kg) TM12* 12’6″ (3.8 m) 6 ea. 159 lbs (72.3 kg) * dual bending & locking handles BENDING CAPACITIES* Material Maximum Thickness Aluminum (3003H14) .027″ Galvanized Steel 29 ga. Painted Steel (Grade D) 29 ga. Roofing Copper 24 oz. soft Zinc .032″ soft Stainless Steel (304L) 29 ga.
CRequest Quote
yDetails
ANGLE BRUSH ATTACHMENT Image
ANGLE BRUSH ATTACHMENT
Bobcat Angle Brush Attachment
CRequest Quote
yDetails
APPLIANCE DOLLY Image
APPLIANCE DOLLY
Appliance Dolly: 800 LB CAPACITY Primarily Used For Gun Safes  
CRequest Quote
yDetails
AUGER WITH BIT Image
AUGER WITH BIT
Auger With Bit
CRequest Quote
yDetails
BILJAX TOWABLE 50
BILJAX TOWABLE 50' BOOM LIFT
Working height¹ 51 ft. 15.7 m Maximum platform height² 45 ft. 13. 7 m Horizontal outreach Maximum (from centerline) Maximum (from edge of footpad) 27 ft. 21 ft. 8.2 m 6.4 m Up and over height 20 ft. 9 in. 6.3 m Turntable rotation 700° non-continuous Load capacity 500 lbs. 227 kg (A) Height – stowed (B) Length – stowed (C) Width – stowed (D) Height – platform (E) Length – platform (F) Width – platform 76 3/4 in. 19 ft. 6 in. 5 ft. 5 1/2 in. 43 in. 30 in. 48 in. 195 cm 5.9 m 166 cm 109 cm 76 cm 122 cm Platform rotation (optional) 90° / manual Jib length 4 ft. 3 in. 1.3 m Jib vertical motion 150° (+70 / -80) Jib rotation (optional) 180° / hydraulic Outrigger type Hydraulic Leveling system Auto leveling Leveling capability 13 1/2° Outrigger footprint – length 12 ft. 4 in. 3.8 m Outrigger foorprint – width 11 ft. 4 in. 3.5 m Footpad diameter 12 1/2 in. 32 cm Tow speed rating 65 mph 105 km/h Tongue weight 170 lbs. 77 kg Overrun brakes Standard Parking brake Standard Tire size ST 225/75 R15D Standard control system 24V DC Batteries 4 x 6V 245 amp-hr Charger 40 amp Total weight³ 3,880 lbs. 1,760 kg ¹ The metric equivalent of working height adds 2 m to the maximum platform height. U.S. adds 6 ft to the maximum platform height. ² Maximum platform height when outriggers are fully extended on a level surface. ³ Weight will vary depending on options and/or market destination.
CRequest Quote
yDetails
BOBCAT 418 EXCAVATOR Image
BOBCAT 418 EXCAVATOR
PERFORMANCE Operating weight 2,593 lb. (1176 kg) (canopy, rubber tracks, std bucket) Travel speed – low / high 1.3 / 2.1 mph (2.1 / 3.1 km/hr.) Hydraulic pumps Type Gear Pump Total capacity Auxiliary fl ow 5.3 gpm (20 L/min.) Auxiliary relief 2,756 psi (190 bar) Track shoes Rubber Width 7.1 in. (180 mm) Ground pressure 4.31 psi (29.7 kPa) Overall width Retracted 27.95 in. (710 mm) Expanded 43.3 in. (1100 mm) Canopy height 87 in. (2210 mm) Arm length 31.9 in. (810 mm) Dig depth 6 ft. (1820 mm) Reach (at ground level) 10 ft. 1 in. (3093 mm) Dump height clearance 5 ft. 11 in. (1817 mm) Arm breakout force 1,248 lbf. (5550 N) Bucket breakout force 1,865 lbf. (8294 N) Drawbar pull 2,227 lbf. (9905 N) Model D722 (Kubota) Fuel/cooling Diesel / Liquid Cylinders/displacement 3 / 43.88 cu. in. (0.72 L) hp / rpm 9.9 hp (7.4 kW) @ 2000 rpm Fuel tank 4.22 gal. (16 L) Cooling system 0.8 gal. (3 L) Track tensioning system Grease cylinder/coil spring Slew speed 9 rpm Tailswing overhang 0 in. (ZTS-Expanded) Boom swing Left 70° Right 70° 7.1 in. rubber tracks Std Hydraulically retractable Std Undercarriage (27.9 in. – 43.3 in.) 2-Speed travel Std Control console locks Std Horn Std Two-way auxiliary hydraulics Std Control pattern selector valve Std Adjustable joystick consoles Std Hydraulic joystick control Std Power port Std Zero tail swing Std Retractable seatbelt Std Spark arrestor muffl er Std Fold-Down TOPS operator guard Std Work light (boom mounted) Std Catalytic exhaust purifi er kit Opt Strobe kit Opt Motion alarm kit Opt Beacon kit Opt
CRequest Quote
yDetails
BOBCAT E26 EXCAVATOR Image
BOBCAT E26 EXCAVATOR
Emissions Tier (EPA) Tier 4 Engine Fuel Diesel Maximum Governed RPM 2,550 rpm Horsepower 24.8 hp Turbocharged Engine Optional Horsepower n/a Performance Operating Weight 6,489 lb Weight Class 2.9 t Travel Speed – High 3.2 mph Travel Speed – Low 1.8 mph Arm Digging Force 3,547 lbf Bucket Digging Force 5,652 lbf Rated Lift Capacity 2359 lb Lift Radius 118 in Boom Swing – Left 70° Boom Swing – Right 55° Maximum Dig Depth 9.5 ft Max Dump Height 10.4 ft Maximum Reach at Ground Level 16 ft Capacities Fuel Tank 9.1 gal Hydraulic System Auxiliary Std Flow 14.2 gal/min Auxiliary Pressure 2,611 psi Dimension Length 170.4 in Overall Length in Travel Position 170.4 in Width 61 in Height 96 in Height with Operator Cab 96 in
CRequest Quote
yDetails
BOBCAT E35 EXCAVATOR Image
BOBCAT E35 EXCAVATOR
Dimensions Boom/Stick Option (Hex) 1 K Max Reach Along Ground 17.2ft in M Max Digging Depth 10.2ft in Max.Dumping Height 11ft in Bucket Digging Force 6968lb Boom Swing – Left 75degrees Boom Swing – Right 55degrees Arm Digging Force 4859lb Dimensions G Height To Top Of Cab 8.02ft in Width 69 in Height 96.2in Length 189.9 in Undercarriage Min Travel Speed 1.6mph Max Travel Speed 2.9mph Specifications Engine Fuel Diesel Gross Power 24.8hp Power Measured @ 2550rpm Emissions Tier 4 Operational Operating Weight 7699lb Fuel Capacity 13.7gal Hydraulic System Operating Pressure 2987psi Lift Lift Radius 118in Hydraulic System Pump Flow Capacity 16.9gal/min Lift Max Lift Capacity 3232lb
CRequest Quote
yDetails
BOBCAT T590 SKID STEER Image
BOBCAT T590 SKID STEER
Engine Emissions Tier (EPA) Tier 4 Tier 4 Engine Cooling Liquid Engine Fuel Diesel Horsepower 66 hp Turbocharged Engine Performance Rated Operating Capacity (ISO) 2,100 lb 1,950 lb Operating Capacity (50% of Tip) 3000 lb 2786 lb Tipping Load 6000 lb 5571 lb Operating Weight 7822 lb 8007 lb Travel Speed 7.1 mph 7.1 mph Travel Speed (2-speed option) 10.4 mph 10.4 mph Ground Pressure (Rubber) 5.1 psi 5.2 psi Capacities Fuel Tank 36.5 gal 36.5 gal Hydraulic System System Relief @ Quick Couplers 3,500 psi Auxiliary Std Flow 17.1 gal/min Auxiliary High Flow 26.7 gal/min Dimension Length 133 in Length without Attachment 104.6 in Length with Standard Bucket 133 in Width 67 in 70 in Width (with bucket) 68 in 74 in Height 77.8 in Height with Operator Cab 77.8 in Height to Bucket Hinge Pin 119 in Reach @ Maximum Height 34.9 in Turning Radius 80 in 80 in Length of track on ground 54.1 in Track Width 12.6 in Track Width – Optional 15.8 in
CRequest Quote
yDetails
BOBCAT T630 SKIDSTEER Image
BOBCAT T630 SKIDSTEER
Dimensions Width Over Tracks 6.08ft in C Height To Top Of Cab 6.78ft in H Reach At Max Lift And Dump 2.01ft in Overall Width 6.08ft in Overall Height 6.78ft in Length With Bucket 11.4ft in Length With Out Bucket 9.04ft in Turning Radius From Center – Machine Rear 88.1in Undercarriage D Length Of Track On Ground 58.5ft in Width Of Track 12.6in Ground Pressure 5.3psi Specifications Engine Fuel Diesel Emission Tier Level Tier 4 Horsepower – Gross 74hp Gross Power 74.3hp Aspiration Turbocharged Operational Operating Weight 8555lb Cooling System Fluid Capacity 3gal Fuel Capacity 27.3gal Max Speed – Low Range 6.6mph Travel Speed 6.2mph Loader Operating Load 2100lb Tipping Angle 6000degrees Hydraulic Pump Flow 23gal/min Relief Valve Pressure 3500psi
CRequest Quote
yDetails
BOBCAT TILLER ATTACHMENT 76INCH Image
BOBCAT TILLER ATTACHMENT 76INCH
  ONLY 76″ AvailableNew 62- and 76-inch tiller attachments break up soil and quickly combine compost and other materials 62-inch attachment has 36 hardened, double-edge, bi-rotational tines 76-inch has 44 hardened double-edge, bi-rotational tines Both models have 6-inch maximum working depth; adjustable for 2- and 4-inch depths Forward and reverse travel direction is standard with both models Both models designed with offset mounting to work next to sidewalks, curbs and buildings    
CRequest Quote
yDetails
BOSCH JIGSAW Image
BOSCH JIGSAW
Bosch Jigsaw
CRequest Quote
yDetails
BRUSH CUTTER ATTACHMENT Image
BRUSH CUTTER ATTACHMENT
Bobcat Brush Cutter Attachment
CRequest Quote
yDetails
BULL FLOAT & FINISHING BROOM Image
BULL FLOAT & FINISHING BROOM
Bullfloat & Finishing Broom
CRequest Quote
yDetails
CARPET DRYER Image
CARPET DRYER
Carpet Dryer
CRequest Quote
yDetails
CARPET EXTRACTOR Image
CARPET EXTRACTOR
Carpet Extractor
CRequest Quote
yDetails
CIRCULAR SAW Image
CIRCULAR SAW
Skill Saw
CRequest Quote
yDetails
CONCRETE FLOOR SAW Image
CONCRETE FLOOR SAW
Concrete Floor Saw
CRequest Quote
yDetails
CONCRETE GRINDER Image
CONCRETE GRINDER
Concrete Grinder
CRequest Quote
yDetails
CONCRETE MIXER Image
CONCRETE MIXER
Concrete Mixer 2cf
CRequest Quote
yDetails
CONCRETE VIBRATOR Image
CONCRETE VIBRATOR
Northrock internal concrete vibrators are built to take a beating. Electric motors are protected by a high strength cast aluminum housing that also dissipates potentially damaging heat. A rugged shock absorbing frame protects the housing while acting as a convenient carrying handle for the unit. Watertight, strain relief power cords take all kinds of abuse on the job and power switches are protected by the frame. 2 HP, 15 amp. For vibrator heads up to 2.5″ in diameter.
CRequest Quote
yDetails
CONDUIT BENDER Image
CONDUIT BENDER
Conduit Bender with Level
CRequest Quote
yDetails
DEHUMIDIFIER Image
DEHUMIDIFIER
Dehumidifier
CRequest Quote
yDetails
DOOSAN G25 TOW-ABLE GENERATOR Image
DOOSAN G25 TOW-ABLE GENERATOR
PRIME POWER RATING @ 480V-3Ø, 0.8PF, 60Hz25 kVA (20 kW ), 30 Amps @ 240V-3Ø, 0.8PF, 60Hz25 kVA (20 kW ), 60 Amps @ 208V-3Ø, 0.8PF, 60Hz22 kVA (17 kW ), 61 Amps @ 240V-1Ø, 1.0PF, 60Hz16.5 kVA (16.5 kW ), 69 Amps @ 120V-1Ø, 1.0PF, 60Hz16.5 kVA (16.5 kW ), 69×2 Amps Voltage Configuration3-Position Switch Frequency Capability50Hz/60Hz Switchable ENGINE Engine Make / ModelDoosan D18 Power Output @ 1800RPM33.5 (25) Emissions Tier LevelTier 4 Final Fuel Tank Capacity – Gal (L)47 (177) Runtime @ 100% Load – Hr25.9 DIMENSIONS w/ running gear Length – in (mm)130.5 (3315) Width – in (mm)72.8 (1850) Height – in (mm)76.6 (1946) Weight (Ready to Run) – lb (kg)3140 (1424) Sound Level @ 23 ft (7m) and 100% Load – dB(A)63
CRequest Quote
yDetails
DOZER BLADE ATTACHMENT Image
DOZER BLADE ATTACHMENT
Bobcat Dozer Blade Attachment
CRequest Quote
yDetails
DRYWALL LIFT Image
DRYWALL LIFT
Drywall Lift: 11′ & 15′ Available
CRequest Quote
yDetails
DRYWALL SANDER Image
DRYWALL SANDER
Tackle drywall projects with help from the Drywall Sander. Boasting 13 ft. of vacuum hose and a 62-in. reach, this sander is great for completing large spaces. Its 8-7/8-in. sanding surface is designed to help you cover large swaths in a single pass for quick, efficient use. Built-in dust collection hose 13 ft. long 2-1/4 in. thick vacuum hose to cover large areas Brush-type skirt surrounding the sanding pad to prevent gouging of wall joints and aiding in dust collection Hook and loop straps for mounting the power cord to the vacuum hose Variable speeds from 1400 to 2000 RPM Dust control for large areas
CRequest Quote
yDetails
E-Z TRENCH BEDSCAPER BED EDGER/DEFINER Image
E-Z TRENCH BEDSCAPER BED EDGER/DEFINER
SPECIFICATIONS Superior Maneuverability Caster steering allows unrestricted turning radiuses for you to create unique and beautiful curved bed shapes. Pneumatic Tires Rolls easily over terrain. Compact A fully adjustable and folding handle allows for easy storage and comfortable working height. Fits into a space 33″L x 27″W x 17″H. Diversity Easily convert to a cable installer which is great for installing hidden pet fencing, low-voltage landscape lighting and control wires. Carbide-tipped cutting blades For cutting through the toughest soils and roots. Oil-Bathed Centrifugal Clutch Handle Mounted Depth Control Easily change depth from a standing position. Adjustable Cutting Depth 2, 3, 4, or 7″ Engine Honda engines provide consistent performance and reliable power. Honda GX200 (6.5hp) Weight 160 lbs
CRequest Quote
yDetails
EXTENSION & A FRAME LADDERS Image
EXTENSION & A FRAME LADDERS
Extension Ladders: A-Frame Ladders:
CRequest Quote
yDetails
FLAGRO HEATER Image
FLAGRO HEATER
Flagro Heaters
CRequest Quote
yDetails
FLOOR BUFFER Image
FLOOR BUFFER
13 & 17 inches
CRequest Quote
yDetails
FORKS ATTACHMENT Image
FORKS ATTACHMENT
Bobcat Forks Attachment These Bobcat Pallet Forks are ideal for handling any kind of bulky or bagged material, from fertiliser to seed and animal feed. Especially handy when working in restricted spaces or along narrow aisles and rows.
CRequest Quote
yDetails
GRAPPLE BUCKET ATTACHMENT Image
GRAPPLE BUCKET ATTACHMENT
Bobcat Grapple Bucket
CRequest Quote
yDetails
GROUND HOG AUGER Image
GROUND HOG AUGER
SPECIFICATIONS Acme Tools Air Shipment Restricted N Acme Tools Brand Name GROUND HOG Acme Tools Part Number HD99-H Assembled Weight (lbs) 295 Case Included No Chuck Design Not Applicable Chuck Size Not Applicable Color / Finish Yellow/Red Country of Origin (numeric) USA Handle Material Steel Horsepower (hp) 9 Housing Material Steel Hydraulic Maximum Flow Rate (gpm) 6 Internal Supplier Part # HD99-H Internet Product Code (IPC) B41C07F34CE MFG Model # (Series) HD99-H MFG Part # (OEM) HD99-H Maximum Drill Diameter (in) 18 Maximum RPM (No Load) 140 Minimum Drill Diameter (in) 2 Number of Speeds Variable Overall Length (in) 100 Package Weight 325 Product Name HD99 Hydraulic Earthdrill Reverse Yes Side Handle No Tool Handle Type D Variable Speed Yes Weight (lbs) 295 Working Pressure (psi) 1500
CRequest Quote
yDetails
HAND DOLLY Image
HAND DOLLY
Features + Benefits 600-lb. capacity Durable steel construction Comfortable P-style handle Smooth-rolling, nonmarking 10in. pneumatic wheels for easy maneuvering 10in.W x 14in.D. toe plate 16.93in.L x 21.65in.W x 51.57in.H overall dimensions
CRequest Quote
yDetails
HILTI TE-70 ROTARY HAMMER DRILL Image
HILTI TE-70 ROTARY HAMMER DRILL
FEATURES & APPLICATIONS Features Highest productivity for a wide range of drilling and chiseling applications Low contact pressure for high user comfort Active Vibration Reduction (AVR) makes the tool less tiring to use – helping to increase daily productivity Optional DRS-Y dust removal system collects up to 95% of dust Ruggedly built for a long lifetime Applications Hammer drilling in concrete, masonry and natural stone with drill bits 12-150 mm in diameter Drilling holes for heavy-duty anchors from 20-40 mm in diameter Breaching and demolition with pointed and flat chisels Drilling with high torque in wood and steel Hammer drilling in concrete, masonry and natural stone with drill bits 1/2″ – 6″ in diameter
CRequest Quote
yDetails
HILTI TE1000 DEMO HAMMER Image
HILTI TE1000 DEMO HAMMER
The Hilti TE 1000-AVR Demolition Hammer combines vibration reduction and electro-pneumatic hammering power to deliver dependable chiseling performance on floors and walls. Its brushless motor technology eliminates the need for carbon brush replacement, providing longer intervals between services and extending overall tool life. Package includes 1 x TE 1000 AVR 120-Volt Breaker (216773), 1 x Supply Cord (2186609), 1 x Pointed chisel (2168870), 1 x Narrow flat chisel (2168874) and 1 x comfort side handle (2107829) Brushless SR motor eliminates the need to replace carbon brushes Delivers 1,950 BPM Features Hilti TE-S chuck Includes 1 TE-SP SM 36 14 in. self-sharpening pointed chisel and 1 TE-SP FM 36 14 in. self-sharpening flat chisel Inline design for easier handling in demanding breaking applications
CRequest Quote
yDetails
HITACHI NAIL COILER Image
HITACHI NAIL COILER
The Hitachi NV65AH2 2-1/2″ coil siding nailer brings power, precision and convenience to the jobsite and weighs only 4. 8 lbs. Capable of driving nails as large as 2-1/2″ x . 099″ at a rate of 3 per second, the NV65AH2 is both powerful and efficient. With newly added features like a selective actuation switch, side load, tilt bottom magazine and repositioned depth of drive adjustment dial, the professional preferred siding nailer gets even better. Additional features such as the adjustable air deflector, no mar nose cap and plastic shield add convenience and the ability to use both wire or plastic sheet nails creates flexibility. Standard accessories include Safety Glasses (875769), Hex Bar Wrench 3mm (943277), Hex Bar Wrench 4mm (944458), and Hex Bar Wrench 5mm (944459). Collation – Wire/Plastic, Nail Length 1-1/2″ – 2-1/2″, Nail Diameter . 090 – . 099, Nail Capacity 200 – 300, Nail Loading – Side, Operating Pressure PSI 70 – 120.
CRequest Quote
yDetails
HOBART CHAMPION ELITE STICK Image
HOBART CHAMPION ELITE STICK
Processes DC Stick (SMAW) Welding 11,000 Watt AC Generator Applications Maintenance Construction Farm/Ranch Rental Home Features Welds 1/8 inch up to 1/4 inch mild steel in a single pass 225 amp DC stick welder Just under 4 ft long and at 490 lbs. weighs less than competitive units 100% duty cycle at 225 amps Generator power is available while welding Covered receptacle package that includes (1) 6- 50R 240V receptacle, (1) 14-50R 240V receptacle and (2) 115V 20A Duplex GFCI receptacles 11,000 watts peak, 9500 watts continuous AC generator power 12 gallon fuel tank for extended run time 23 HP Kohler engine w/ twin cylinder, 4-cycle, overhead- valve “No tools” oil change and standard hour meter to help maintain routine scheduled oil servicing Auto-idle for greater fuel savings and reduced noise Coarse and fine range amperage adjustment Manufactured in USA    
CRequest Quote
yDetails
HOBART HANDLER 140 MIG WELDER Image
HOBART HANDLER 140 MIG WELDER
Product Summary The Hobart Handler® 140 Flux-Cored/MIG Welder is a compact wire-feed MIG welder designed to run on 115V household power. The generous operating parameters allow you to weld thin gauge steel (24-ga.) up to 1/4in. steel plate. The Handler 140 is easy to set up and runs flux-cored steel, solid and aluminum wire. Plus it is extremely versatile and perfect for the welder who wants to work on auto body, household repairs, or even heavier farm projects requiring extra power. This tapped voltage unit gives you the best possible power and arc available while welding. And with a powerful lineup of new and upgraded features, you can expect more performance than ever before! Comes ready to weld with or without shielding gas rand Hobart Ship Weight 66.0 lbs Welding Process(es) MIG, Flux-core Volts 115 Amps 140 Duty Cycle 20% at 90A Output Amps 25–140 Mig Ready Yes Spoolgun Included No Wire Feed Speed Control Yes Weldable Metals Steel, aluminum, stainless Weld Thickness (in.) 24-ga.–1/4 in. steel Clamp Cable Length (ft.) 10 Regulator and Gas Hose Included Yes Shielding Gas Required Optional Welding Wire Diameter (in.) 0.023–0.035 Power Cord (ft.) 10 Dimensions L x W x H (in.) 12 x 18 x 24
CRequest Quote
yDetails
HOLESAW KIT Image
HOLESAW KIT
Holesaw Kit
CRequest Quote
yDetails
HONDA MID-TINE TILLER Image
HONDA MID-TINE TILLER
   Fenders reinforced for durability of 6 HP tiller  Chain and gear drive transmission  Maximum tine speed of 84 RPM  26-inch tilling width  13-inch tine diameter  Speed and depth of tiller can be adjusted  Muffler resistant to corrosion  Dual air filter elements  Weighs 126 pounds  Retractable wheels make moving the tiller from one location to another easy  staggered tines for lower vibrations  Wheels can be lifted and locked into position  Reinforced handle  Commercial Honda GX160 engine  OHV engine type  2.5-quart fuel tank capacity  Commercial fuel filter and cap  Front engine guard for protection  Guard can be used for tying the tiller down during transport  Engine bed reinforced
CRequest Quote
yDetails
HONDA REAR-TINE TILLER Image
HONDA REAR-TINE TILLER
Specifications Tiller TypeRear Tine Tilling Width20″ Tine Diameter12″ EngineHonda GX240 Displacement270cc Air filterdual element w/cyclone filter Fuel capacity4.6 qt Transmission Speeds3 – forward 1 – reverse Tine speed @max engine speed225 rpm Transmission Typechain and gear drive Dimensions (LxWxH)65.4″ x 24.0″ x 49.0″ Dry Weight265 lb.
CRequest Quote
yDetails
HONDA WEED TRIMMER Image
HONDA WEED TRIMMER
Honda Weed Wacker/Trimmer
CRequest Quote
yDetails
HUSQVARNA LDX ATTACHMENT Image
HUSQVARNA LDX ATTACHMENT
DX Clean Sweep rubber broom attachment gives sweeping action without marks Clean Sweep attachment for LDX trimmer, 23.6″ wide
CRequest Quote
yDetails
HYDRO RAM ATTACHMENT Image
HYDRO RAM ATTACHMENT
Bobcat Hydro Ram Attachment
CRequest Quote
yDetails
HYPERTHERM PLASMA CUTTER Image
HYPERTHERM PLASMA CUTTER
Input voltages (± 10%) CSA 200 – 240 V, 1-PH, 50-60 Hz OR 480 V, 3-PH, 50-60 Hz1 CE/CCC 230 V, 1-PH, 50-60 Hz OR 400 V, 3-PH, 50-60 Hz Input current @ 6.5 kW CSA 200 – 240 V, 1-PH, 39/32 A OR 480 V, 3-PH, 9.4 A1 CE/CCC 230 V, 1-PH, 33 A OR 400 V, 3-PH, 10 A Output current 10–45 A Rated output voltage 145 VDC Duty cycle @ 40° C (104° F) CSA 50% @ 45 A, 200 – 240 V, 1-PH 60% @ 41 A, 200 – 240 V, 1-PH 100% @ 32 A, 200 – 240 V, 1-PH 50% @ 45 A, 480 V, 3-PH 60% @ 41 A, 480 V, 3-PH 100% @ 32 A, 480 V, 3-PH CE/CCC 50% @ 45 A, 230 V, 1-PH 60% @ 41 A, 230 V, 1-PH 100% @ 32 A, 230 V, 1-PH 50% @ 45 A, 400 V, 3-PH 60% @ 41 A, 400 V, 3-PH 100% @ 32 A, 400 V, 3-PH Open circuit voltage (OCV) 275 VDC (200 – 240 V, CSA/CE/CCC and 480 V, CSA) 265 VDC (400 V CE/CCC) Dimensions with handles 442 mm (17.4″) D; 173 mm (6.8″) W; 357 mm (14.1″) H Weight with 6.1 m (20′) torch CSA 14 kg (31 lbs.) CE/CCC 15 kg (33 lbs.) Gas supply Cutting: air (clean, dry and oil-free), nitrogen, F5 Gouging: air (clean, dry and oil-free), nitrogen, F5 Marking: air (clean dry and oil-free) argon Recommended gas inlet flow rate / pressure 188 I/min (400 scfh) @ 5,9 bar (90 psi) Input power cable length 3 m (10′) Power supply type Inverter – IGBT Engine drive requirement 12.5 kVA (10 kW) for full 45 A output Electrical efficiency 88% Recyclability 100% Certifications CSA certified for use in the Americas and Asia, except China. CCC for use in China. CE, RCM, GOST-TR, UkrSEPRO, and Serbian AAA for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted. Warranty Power supply: 3-year Torch: 1-year 1 For use in North America only. Engine-driven generator operation Engine drive rating System output current Performance (arc stretch) 10 kW 45 A Full 8 kW 45 A Limited 6 kW 30 A Full Cut capacity Capacity Thickness Cut speed Cutting Recommended 16 mm (5/8″) 22 mm (7/8″) 500 mm/min (20 ipm) 250 mm/min (10 ipm) Severance (hand cutting) 29 mm (1-1/8″) 125 mm/min (5 ipm) Pierce* 12 mm (1/2″) * Pierce rating for handheld use or with automatic torch height control Capacity Metal removal rate Groove profile Gouging Typical gouge 3,4 kg (7.5 lbs.) per hour 3,2 mm (.12″) D x 6,8 mm (.26″) W Production cut chart Material Thickness inches Current amps Production cut speed* ipm Mild steel 10 GA 45 181 1/4 45 72 3/8 45 38 1/2 45 24 5/8 45 16 Stainless steel 10 GA 45 134 1/4 45 59 3/8 45 29 1/2 45 19 5/8 45 13 Aluminum 1/8 45 263 1/4 45 104 3/8 45 42 1/2 45 26 5/8 45 14 Material Thickness mm Current amps Production cut speed* mm/min Mild steel 3 45 5590 6 45 2110 10 45 920 12 45 690 16 45 400 Stainless steel 3 45 4725 6 45 1695 10 45 870 12 45 540 16 45 320 Aluminum 3 45 7120 6 45 3095 10 45 1015 12 45 745 16 45 340
CRequest Quote
yDetails
INDOOR SCISSOR LIFT Image
INDOOR SCISSOR LIFT
Power Source Batteries 4 x 6V, 220 A-h Charger 20 A Automatic General Specifications Brakes Automatic Friction – Front Capacity – Hydraulic Reservoir 10.60 L / 2.8 gal. Hydraulic Pump Fixed Displacement Gear Machine Weight 1966 kg / 4334.3 lb Performance Data Drive Speed – Platform Elevated 0.80 km/h / 0.5 mph Drive Speed – Platform Lowered 4.40 km/h / 2.7 mph Drive System 24V Electric Gradeability 25 % Lift Time 30 sec. Lower Time 40 sec. Maximum Drive Height 6.10 m / 20 ft Platform Capacity – Extension 120 kg / 264.6 lb Platform Capacity – Unrestricted 360 kg / 793.7 lb Turning Radius – Inside 0 m / 0 ft Turning Radius – Outside 2.06 m / 6.8 ft Dimensional Data Ground Clearance 0.09 m / 4 in. Machine Height 2.20 m / 7.2 ft Machine Height – Rails Folded 1.87 m / 6.1 ft Machine Length 2.30 m / 7.5 ft Machine Width 0.81 m / 2.7 ft Platform Dimension A 0.76 m / 2.5 ft Platform Dimension B 2.30 m / 7.5 ft Platform Extension Length 0.90 m / 3 ft Platform Height 6.10 m / 20 ft Platform Height – Lowered 1.10 m / 3.6 ft Platform Railing Height 1.10 m / 3.6 ft Tyre Size 406 x 125 mm Wheelbase 1.88 m / 6.2 ft Reach Specifications Platform Height 6.10 m / 20 ft Working Height 8.10 m / 26.6 ft
CRequest Quote
yDetails
KINETIC WATER RAM Image
KINETIC WATER RAM
SPECIFICATIONS 16 gauge plated steel cylinder tested for up to 600 lbs, pressure. 100 lbs. gearless pressure gauge provides pinpoint pressure control. Built-in air compressor easily pumps up to desired pressure. Flexible cone seals drains ranging from 1-1/4″ to 4″diameter. Equipped with Schraeder valve for use with external air compressor when clearing difficult stoppages. Standard fittings include caulking hose, 4″ tapered rubber cone and five tapered rubber plugs for sealing openings from 1-1/4″ through 4″. Optional accessories include: carrying case, toilet attachment, 6″ tapered rubber cone, 1-1/2″, 2″, 3″ and 4″ expansion plugs, universal faucet adapter, water supply hose, and check valve.
CRequest Quote
yDetails
LASER LEVEL Image
LASER LEVEL
Item Weight 20.9 pounds Product Dimensions 12.25 x 12.25 x 55.75 inches Item model number 99-005K Batteries 4 AA batteries required. (included) Item Package Quantity 1 Number of Handles 1 Batteries Included? Yes Batteries Required? Yes
CRequest Quote
yDetails
LAWN EDGER Image
LAWN EDGER
The Pro Edger is user–friendly with fingertip controls and a ratchet–arm height adjustment system for fatigue–free operation and control. The Little Wonder Pro Edger is built for heavy, daily usage. Cut create crisp, distinct edges faster, and with less effort.   Edges up to 90 feet per minute. Get the job done quickly and more efficiently! Largest available cast iron cutter head on the market Dual belt drive provides extra power to the blade and reduces slippage during application. 10″ steel blade is sharpened on all four sides giving you the ability to flip the blade over and extends time between sharpening Adjust cutting depth up to 4″ Blade shield keeps debris off the belts Convenient controls adjust depth, belt tension, and blade engagement all from the operator’s position Anti-vibration grip for user comfort Four wheel design provides extra stability and eliminates the need for a curb wheel. All wheels have steel hubs with ball bearings and full axles front and rear for smoother and easier maneuverability Optional Crack Cleaner Attachment available
CRequest Quote
yDetails
LAWN ROLLER Image
LAWN ROLLER
Tow Behind Lawn Roller
CRequest Quote
yDetails
LIGHT TOWER BALLOON TEREX Image
LIGHT TOWER BALLOON TEREX
Balloon Type Light Tower
CRequest Quote
yDetails
LINOLEUM ROLLER Image
LINOLEUM ROLLER
This heavy duty is ideal for use when installing linoleum, VCT, carpet, sheet vinyl, cork underlayment and other floor coverings. The high quality, segmented roller ensures maximum transfer of adhesive. The adjustable handle is comfortable for long use. Made from solid steel for a lifetime of trouble-free service Building materials are protected by the roller’s smooth surface and rounded corners All rollers float independently on the axle to compensate for inconsistencies Yoke and handle are painted to prevent rusting
CRequest Quote
yDetails
MAGNETIC DRILL PRESS Image
MAGNETIC DRILL PRESS
Milwaukee 4208-1 Specifications: • Voltage: 120V • Amps: 12.5 • Drill Capacity: 1-1/4″ • No Load Speed: 500/250 RPM • Cord Type: 9 ft. Fixed • Construction Type: Grounded • Electronic Feedback: Yes • Tap Capacity: 1″-14 • Drill Point Pressure: 1,530/1,600 lbs. • Adjustable Base: Yes • Drill Travel: 11″ • Chuck or Taper: No. 3MT Milwaukee 4208-1 Includes: • Electromagnetic Drill Press Base • No. 3 MT Motor Milwaukee 4208-1 Features: • 1-1/4″ Capacity, 12.5 amp motor, 500/250 RPM • Feedback speed control • Solid state electronic switching • Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line
CRequest Quote
yDetails
MILWAUKEE 3/8 DRILL Image
MILWAUKEE 3/8 DRILL
Product Summary The Milwaukee corded drill features a powerful 8.0 Amp motor and 0-2,800 RPM, giving you the power to perform even the toughest applications. Durability standard with an all metal gear case that protects the gears and provides superior support in high torque applications. Perfect for metal drilling, wood drilling and fastening applications. Item# 153463 Brand Milwaukee Chuck Size (in.) 3/8 Keyless Chuck Yes Max. Speed (RPM) 2,800 Amps 8.0 Side Handle No Trigger Lock No Cord Length (ft.) 8
CRequest Quote
yDetails
MILWAUKEE BAND SAW Image
MILWAUKEE BAND SAW
Milwaukee Band Saw
CRequest Quote
yDetails
MILWAUKEE CORDLESS DRILL Image
MILWAUKEE CORDLESS DRILL
Milwaukee Cordless Drill
CRequest Quote
yDetails
MILWAUKEE DRYWALL SCREWDRIVER Image
MILWAUKEE DRYWALL SCREWDRIVER
Milwaukee Drywall Screwdriver